Materials 1.0

MATERIALS 1.0 IS A COLLECTION OF DATASHEET RELATED TO MATERIALS WITH AN INGEGNERISTIC USE THAT PROVIDES MANY DATES ABOUT CHIMICAL, PHYSICAL, MACHANICAL AND TECHNOLOGICAL CHARACTERISTICS COMPARED WITH THE HEAT TREATMENT STATE. FURTHERMORE THE TYPICAL APPLICATIONS, THE HARDENABILITY AND THE WELDABILITY ARE DEFINED.
Case-hardening steels EN 10084 : 2000; C10E; C10R; C15E; C15R; C16E; C16R; 17Cr3; 17CrS3; 28Cr4; 28CrS4; 16MnCr5; 16MnCrS5; 16MnCrB5; 20MnCr5; 20MnCrS5; 18CrMo4; 18CrMoS4; 22CrMoS3-5; 20MoCr3; 20MoCrS3; 20MoCr4; 20MoCrS4; 16NiCr4; 16NiCrS4; 10NiCr5-4; 18NiCr5-4; 17CrNi6-6; 15NiCr13; 20NiCrMo2-2; 20NiCrMoS2-2; 17NiCrMo6-4; 17NiCrMoS6-4; 20NiCrMoS6-4; 18CrNiMo7-6; 14NiCrMo13-4; UNI 7846 : 1978; C10; C15; 16MnCr5; 20MnCr5; 18CrMo4; 12NiCr3; 16CrNi4; 20CrNi4; 16NiCrMo2; 20NiCrMo2; 18NiCrMo5; 18NiCrMo7; 16NiCrMo12; UNI 8550 : 1984; 16NiCr11
Quench and tempering steels UNI 7874:1979; UNI 7845:1978; C20; C25; C30; C35; C40; C45; C50; C55; C60; C28Mn; 38Cr2; 34Cr4; 41Cr4; 36CrMn5; 25CrMo4; 30CrMo4; 35CrMo4; 42CrMo4; 32CrMo12; 50CrV4; 24CrMoV5-5; 21CrMoV5-11; 30CrMoV5-11; 40NiCrMo2; 39NiCrMo3; 30NiCrMo8; 40NiCrMo7; 30NiCrMo12; 34NiCrMo16
Quench and tempering steels EN 10083-1:1993; 2 C22; 2 C25; 2 C30; 2 C35; 2 C40; 2 C45; 2 C50; 2 C55; 2 C60; 3 C22; 3 C25; 3 C30; 3 C35; 3 C40; 3 C45; 3 C50; 3 C55; 3 C60; 25CrMo4; 25CrMoS4; 28Mn6; 30CrNiMo8; 34Cr4; 34CrS4; 34CrMo4; 34CrMoS4; 34CrNiMo6; 36CrNiMo4; 36NiCrMo16; 37Cr4; 37CrS4; 38Cr2; 38CrS2; 41Cr4; 41CrS4; 42CrMo4; 42CrMoS4; 46Cr2; 46CrS2; 50CrMo4; 51CrV4
Boron quench and tempering steels EN 10083-3:1997; 20MnB5; 30MnB5; 38MnB5; 27MnCrB5-2; 33MnCrB5-2; 39MnCrB6-2
Quench and tempering steels EN 10083-1:1998 C22E; C22R; C25E; C25R; C30E; C30R; C35E; C35R; C40E; C40R; C45E; C45R; C50E; C50R; C55E,C55R; C60E,C60R; 25CrMo4; 25CrMoS4; 28Mn6; 30CrNiMo8; 34Cr4; 34CrS4; 34CrMo4; 34CrMoS4; 34CrNiMo6; 36CrNiMo4; 36NiCrMo16; 37Cr4; 37CrS4; 38Cr2; 38CrS2; 41Cr4; 41CrS4; 42CrMo4; 42CrMoS4; 46Cr2; 46CrS2; 50CrMo4; 51CrV4
Quality quench and tempering steels EN 10083-2:1998; C20; C25; C30; C35; C40; C45; C50; C55; C60
Quench and tempering steels EN 10083-2:2006; UNI EN 10083-3:2006; C22E; C22R; C25E; C25R; C30E; C30R; C35E; C35R; C40E; C40R; C45E; C45R; C50E; C50R; C55E; C55R; C60E; C60R; 25CrMo4; 25CrMoS4; 28Mn6; 30CrNiMo8; 34Cr4; 34CrS4; 34CrMo4; 34CrMoS4; 34CrNiMo6; 36CrNiMo4; 36NiCrMo16; 37Cr4; 37CrS4; 38Cr2; 41Cr4; 41CrS4; 42CrMo4; 42CrMoS4; 46Cr2; 50CrMo4; 51CrV4; 30NiCrMo16-6; 35NiCr6; 39NiCrMo3; 20MnB5; 30MnB5; 38MnB5; 27MnCrB5-2; 33MnCrB5-2; 39MnCrB6-2
Quality quench and tempering steels EN 10083-2:2006; C20; C25; C30; C35; C40; C45; C50; C55; C60

DESCRIPTION:
MATERIALS 1.0 represents a support to the metallurgical design of a component, to the inspection during the quality control and to the manufacture of the same. The classification of the materials is performed favouring the alphanumerical designation except for the materials where the trade name is dominant. For completeness and comfort use even some materials belonging to standards by now retired and replaced (for example 18NiCrMo5 case-hardening steel UNI 7846/8550) are considered.

CONDITIONS:

1. the subdivision of the materials is performed according to the level class 1, 2, 3, 4 and the alphanumerical designation (or trade name)

USEFULNESS:

1. metallurgical design
2. quality control
3. manufacturing

USE:

1. choose the material from the curtain menu
2. click on display the datasheet

NOTE:
Granit Engineering tools are free of charge.
To use them, you need to register filling in the form below.
If you are a registered user, please perform the authentication.
If you are not a registered user, please register free now!

Register here

Granit Engineering doesn’t assume any responsibility concerning special and accidental damage, direct or indirect (included, without restrictions, loss of profit, interruption of the activity, loss of informations or other economic losses) coming from the use of the tools available on graniteng.com