Registration
The registration to the Granit Engineering services is free of charge.
To obtain username and password please compile the form below and read the private data treatment informative report.
Name
Surname
E-mail
Confirm E-mail
Address
Corporate Name
Qualification
AGREEMENT TO THE PRIVATE DATA TREATMENT In relation to the D.lgs.n.196/2003 ( Private Data Protection Code ), your private data like corporate name, name, surname, qualification, address, e-mail are used by Granit Engineering Studio Tecnico Ing. Bianchi Tommaso Maria exclusively for statistical purpose and for aims connected to the required service. The data treatment is done by manual and information procedures. The data treatment takes place at the Granit Engineering Studio Tecnico Ing. Bianchi Tommaso Maria ( Head & Registered Office v. A.Previtali, 20 - 24122 ( BG ) Italia ) and it is managed by the charged personnel or by occasionally involved in maintenance activities personnel. No data from the web service are communicated or released. In relation to the paragraph n.7 of the D.lgs.13 n. 196/2003 you can exercise your rights in every moment. Your requests have to be addressed to Granit Engineering Studio Tecnico Ing. Bianchi Tommaso Maria. TREATMENT RESPONSIBLE Granit Engineering Studio Tecnico Ing. Bianchi Tommaso Maria Head & Registered Office : v. A.Previtali, 20 - 24122 - Bergamo (BG) Italy
tel. (+39) 0354128415 fax (+39) 0354128415 mail: info@graniteng.com TREATMENT HOLDER Granit Engineering Studio Tecnico Ing. Bianchi Tommaso Maria Head & Registered Office : v. A.Previtali, 20 - 24122 - Bergamo (BG) Italia tel. (+39) 0354128415 fax (+39) 0354128415 mail: info@graniteng.com In relation to the paragraphs n. 13/23 D.lgs.13 n. 196/2003, I give my consent to the treatment of my private data
I Agree
I Do Not Agree
Certified Access
username
password
Forgot your password?
Register
Services
Mechanical Design
Engineering
Analysis and Calculation
Metallurgical Design
Welding Engineering
Technical Documents
Cams
Tools
METADVICE
INDUCTIONHARDNESS 1.0
LASERHARDNESS 1.0
DEEPHARDNESS 1.0
DEEPHARDNESS 2.0
DRAWINGSPECIFICATIONS 1.0
CASEHARDENING 1.0
MATERIALS 1.0
05/09/2008